P
ROTOCOL
R
ELATED
C
ONFIGURATION
M
ENU
4-51
GVRP Configuration
GARP VLAN Registration Protocol (GVRP) defines a method for
switches to exchange VLAN information in order to register VLAN
members on ports across the network. VLANs are dynamically configured
based on join messages issued by host devices and propagated throughout
the network. Use the GVRP page to enable automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
(Default: Disabled)
Note: GVRP will also be enabled if the VLAN Mode selection under the
VLAN Configure screen is set to “802.1QwithGVRP.”
Console – Click Protocol Related Configuration
=>
GVRP. Enable or
disable GVRP, then save your settings.
Tiger Switch 10/100 6709FL2 : GVRP Configuration
===========================
GVRP : Disabled
actions-> <Edit> <Save> <Quit>
Select the action menu.
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter=Select Item
To Next Page
Loading...
Need help?
General
