SMC Networks Barricade Cable/DSL Router User Manual

-28-
Appendix A: Console Mode
When you forget the system password or the IP address for the Barricade, you need to enter
the console mode to reset them.
Before invoking the console program, be sure to find a null modem cable and use it to
connect from the Barricade’s COM port to your computer’s COM port. Then, execute a
terminal program, such as the Hyper Terminal of MS Windows 95. The connection
parameters should be set to 19200 8-N-1. Be sure to reboot the Barricade. When the M1
indicator starts flashing regularly, you can press the “Enter” key several times. There
should be some messages, and console prompt ">" appears in the terminal.
In the console mode, you may reset the IP address and the system password of the Barricade.
Please remember to execute the SR command to save the changes you have made. For
example,
IP 192.168.123.254
PW admin
SR
Schematic diagram of null modem cable

SMC Networks Barricade Cable/DSL Router Specifications

General

Brand	SMC Networks
Model	Barricade Cable/DSL Router
Category	Network Router
Language	English