SMC Networks Barricade User Manual

-30-
Appendix B: TCP/IP Configuration for Windows 95/98
This section will show you how to install the TCP/IP protocol into your personal computer.
If you are unfamiliar with it, please refer to your network card manual. Also, Section B.2
shows you how to set TCP/IP values to operate the Barricade correctly.
B.1 Installing TCP/IP protocol into your PC
1. Click the Start button and choose Settings, then click Control Panel.
2. Double click the Network icon and select the Configuration tab in the Network
window.
3. Click the Add button to add the network component into your PC.
4. Double click Protocol to add TCP/IP protocol.

SMC Networks Barricade Specifications

General

Brand	SMC Networks
Model	Barricade
Category	Network Router
Language	English