SMC Networks ITV1000 series - Standard Specifications; Model and Specification Details; How to Order



Thesesafetyinstructionsareintendedtopreventahazardoussituationand/orequipment
damage.Theseinstructionsindicatethelevelofpotentialhazardbylabelsof“CAUTION”
“WARNING”,or“DANGER”.Toensuresafety,besuretoobserveISO4414,JISB8370and
othersafetypractices.
■Explanationoflabel
Label Meaningoflabel
△
！ WARNING
Operatorerrorcouldresultinseriousinjuryorlossoflife.
△
！ CAUTION
Operatorerrorcouldresultininjuryorequipmentdamage.

△
！ WARNING
①Thecompatibilityofpneumaticequipmentistheresponsibilityoftheperson
whodesignsthepneumaticsystemordecidesitsspecifications.
Since the products specified here are used in various operating conditions, their
compatibilityforthespecificpneumaticsystemmustbebasedonspecificationsorafter
analysesand/orteststomeetyourspecificrequirements.Theexpectedperformanceand
safety assurance will be the responsibility of the person who has determined the
compatibilityofthesystem.Thispersonshouldcontinuouslyreviewthesuitabilityofall
itemsspecified,referringtothelatestcataloginformationwithaviewtogivingdue
considerationtoanypossibilityofequipmentfailurewhenconfiguringasystem.
②Onlytrainedpersonnelshouldoperatepneumaticallyoperatedmachineryand
equipment.
Compressedaircanbedangerousifanoperatorisunfamiliarwithit.Assembly,handling
orrepairofpneumaticsystemsshouldbeperformedbytrainedandexperiencedoperators.
③Donotservicemachinery/equipmentorattempttoremovecomponentsuntil
safetyisconfirmed.
A.Inspectionandmaintenanceofmachinery/equipmentshouldonlybeperformedoncesafety
ofpersonnelandequipmentisconfirmed.
B.Whenequipmentistoberemoved.Stopsuppliedair, exhausttheresidualpressure,
verifythereleaseofair,turnthepoweroffandconfirmsafetybeforeperforming
maintenance.
C.Beforemachinery/equipmentisrestarted,ensuresafetybeforeapplyingpower.
④ContactSMCiftheproductistobeusedinanyofthefollowingconditions.
A.Conditionsandenvironmentsbeyondthegivenspecifications,orifproductisused
outdoors.
B.Installationonequipmentinconjunctionwithatomicenergy,railway,airnavigation,
vehicles,medicalequipment,foodandbeverages,recreationequipment,emergencystop
circuits,clutchandbrakecircuitinpressapplications,orsafetyequipment.
C.Anapplicationwhichhasthepossibilityofhavingnegativeeffectsonpeople,property,
oranimalsrequiringspecialsafetyanalysis.

Safetyinstructions
―2―