SMC Networks SMC-EZ1024DT User Manual

EZ Switch 10/100
24-Port Fast Ethernet Switch
 24 auto-MDI/X ports – connect to PCs or other switches
or hubs
 Plug and play – nothing to configure, no crossover
cables required
 Auto-negotiation of speed and duplex mode
 Full-duplex support on all ports
 Half- and full-duplex flow control
 Desktop and rack mountable
User Guide
SMC-EZ1024DT

SMC Networks SMC-EZ1024DT Specifications

General

Switching Capacity	4.8 Gbps
MAC Address Table	8K entries
Forwarding Rate	3.6 Mpps
Data Link Protocol	Ethernet, Fast Ethernet
Ports	24 x 10/100 Mbps
Data Transfer Rate	100 Mbps
Switching Protocol	Store and Forward
Jumbo Frame Support	No

Summary

Limited Warranty

Compliances

North American and Japanese Compliances

FCC, Industry Canada, and Japan VCCI Class A compliance.

European Compliance

EC Conformance Declaration and EU directive standards applied.

Australian and Safety Compliance

Australian standard compliance and UL safety statement.

Important Safety Instructions (Germany)

About the EZ Switch 10/100

Features and Benefits

Installing the Switch

Selecting a Site

Instructions

Step-by-step instructions for installing and connecting the switch.

Troubleshooting

Power LED Issues

Troubleshooting steps for when the power LED is not lighting up.

Link LED Issues

Troubleshooting steps for when the link LED does not activate after connection.

Specifications