SMC Networks SMCGS10P-Smart Installation Guide

C HAPTER 1 | Introduction
Overview
– 28 –
Figure 5: Grounding Point
RESET BUTTON
If you encounter any switch malfunctions, such as a hang or non-recoverable
error, you might want to reset the switch to its default configuration by pressing
and holding the reset button for more than 10 seconds. The reset button is
located on the front panel.
Figure 6: Reset Button
AC 100-240Vac, 50~60Hz, 1.7A
Grounding Point
/
Reset Button

SMC Networks SMCGS10P-Smart Specifications

General

Brand	SMC Networks
Model	SMCGS10P-Smart
Category	Switch
Language	English