C
ONFIGURING
THE
B
ARRICADE
4-8
PPPoE
Enter the User Name and Password required by your ISP in the
appropriate fields. If your ISP has provided you with a Service Name enter
it in the Service Name field, otherwise, leave it blank. Leave the
Maximum Transmission Unit (MTU) at the default value (1454) unless you
have a particular reason to change it. Enter the maximum idle time for the
Internet connection. After this time has been exceeded the connection will
be terminated. Check the Auto-reconnect check box to automatically
re-establish the connection as soon as you attempt to access the Internet
again.
Click NEXT to proceed, or BACK to change your settings.
Note: Clicking NEXT will not automatically connect the Barricade to the
Internet. The Barricade will only connect when you explicitly
request it to, for example, by launching your web browser.
To Next Page
Loading...
