SMC Networks ZK2 A Series - Single Unit Replacement Parts Ordering

-32-
No. ZK2-OM01301
6.3. Replacement Parts
No.
Item
Remarks
5
Valve assembly
-
6
Connector assembly
Connector for solenoid valve 3 wires (For valve type K, R),
2 wires (For valve type J)
7
One-touch fitting assembly
Standard supply (PV) port: ø6, ø1/4”
8
Sound absorbing material
10 pcs. per set
9
Vacuum port adapter assembly
With One-touch fitting and filter element
10
Filter element
Nominal filtration rating: 30 μm, 10 pcs. per set
11
Body gasket
Gasket integrated with the exhaust interference
prevention valve. (10 pcs. per set)
12
Filter case
Case body: Polycarbonate (Refer to Note on P.53)
Clear filter case: without a port for the pressure switch or
sensor,
Opaque filter case: with a port for the pressure switch or
sensor.
13
Pressure switch for vacuum assembly
With 2 screws and 1 O-ring
14
Lead wire with connector
-
15
Pressure sensor assembly
With 2 screws and 1 O-ring
16
High-noise reduction silencer assembly
With sound absorbing material
(High-noise reduction silencer)
17
Release lever
10 pcs. per set
18
lock nut
10 pcs. per set