SMC Networks ZK2 A Series - Replacement Parts for Single Unit;How to Order

-33-
No. ZK2-OM01301
6.4. Replacement Parts for Single Unit/How to Order
(Including single unit for manifold)
(5) Valve assembly
ZK2-VA A K 5 L A- C -A
[1] [2] [3] [4] [5]
Select the ZK2-VAAK□LOA-A for a pressure switch with energy saving function.
This assembly does not include special cable assembly for a pressure switch with energy saving function.
(6) Connector assembly
ZK2-LV W K - A
(7) One-touch fitting assembly
(Purchasing order is available in units of 10 pieces.)
KJH 06 - C2
[1] Applicable system
A
Ejector system
P
Vacuum pump system
[4] Wiring
C
Manifold common wiring
L
Individual wiring, with connector assembly (lead wire length: 300mm)
LO
Individual wiring, without connector assembly connector
[2] Valve type
K
Supply valve: N.C., Release valve: N.C.
R
Supply valve: Self-holding release valve linked,
Release valve: N.C.
J
Supply valve: N.C., Release valve: None
[3] Rated voltage
5
24 VDC
6
12 VDC
Applicable valve type
W
Valve type K, R
(With supply valve
and release valve)
S
Valve type J
(Supply valve only)
Lead wire length
Nil
300 mm
6
600 mm
10
1000 mm
20
2000 mm
30
3000 mm
Port size
06
ø6 One-touch fitting (Straight)
Metric size
07
ø1/4” One-touch fitting (Straight)
Inch size
Valve type: J
Valve type: K, R
[5] Other specification
C
Vacuum pump system (Valve type:R)
PE port female thread specification (M3)
Nll
Specification other than that listed above.