SMC Networks ZK2 A Series - Page 36

-35-
No. ZK2-OM01301
(12) Filter case
note)
ZK2-FC□ -A
Port for the pressure switch or sensor
(13) Pressure switch for vacuum assembly
ZK2-ZS E A M G G - A
[1] [2] [3] [4] [5]
A
(14) Lead wire with connector
[1] Rated pressure range and function
E
0 to -101 kPa
Pressure switch for vacuum
Open collector 2 outputs
F
-100 to 100 kPa
V
-100 to 100 kPa
Pressure switch with energy saving function
Open collector 1 output
[2] Output specifications
A
NPN
B
PNP
[3] Unit specifications
Nil
Unit selection function
Note 1)
M
SI unit only
Note 2)
Note 1) The unit selection function is not available in Japan due to new measurement law.
Note 2) Fixed unit: kPa
[4] Lead wire with connector
Nil
None
G
When 1. Is “E” or “F”: For pressure switch for vacuum ,lead
wire with connector (Length 2m)
for pressure switch for vacuum
When 1. Is “V”: For pressure switch with energy saving
function,lead wire with connector
Lead wire with connector (Length 2m)
for pressure switch with energy saving function
[5] Mounting
Note)
Nil
Mounted to the single unit
L
Mounted to the manifold
The length of the mounting screw ejector included in the package is different.
Note) When ordering an ejector without valve, select Nil for mounting.
Symbol
Port for the pressure switch or sensor
Filter case color
P
With port (type with pressure switch or sensor)
Smoke
T
Without port (type without pressure switch or sensor)
Clear
Note) Vacuum port adapter assembly is not included.