SMC Networks ZL112A Series - Construction, Maintenance, and Parts

Document No.ZL-OM01001
- 16 -
Construction
Components
The components other than (1) and (6) are available as service parts. Refer to “Maintenance and Check” on the
next pages for details.
Without valves and switch
With valves and switch
No. Description Material Note
1 Body assembly Resin, NBR, Steel
2
Suction cover assembly
(Filter element included)
Resin, NBR, Steel,
Non-woven fabric
Silencer case assembly (Sound absorbing
material and clip included)
Resin, Steel For silencer exhaust
Port block assembly
(Clip included)
Aluminum alloy, NBR, Steel For port exhaust
4 Ejector assembly Resin, NBR, Fluororubber
5
Valve plate assembly (Needle is included
for models with release valves.)
Resin, NBR, HNBR, Steel
6
Vacuum break flow
adjusting needle
Brass (Electroless nickel
plating),
Resin, NBR, Steel
7 Filter element Non-woven fabric
8 Sound absorbing material Resin
9 Supply valve, Release valve -
Digital vacuum pressure
switch
- For Digital vacuum pressure switch
Vacuum port adapter assembly
Resin, Aluminum alloy, NBR,
Steel
For Vacuum port adapter
Pressure gauge assembly - For Vacuum pressure gauge
11 O-ring NBR
3
10