30
30
2
25
41.71.5
02L: 60.5
N02L: 61
Piping port
02L: R1/4
N02L: NPT1/4
M5 x 0.8
Thread depth 5
10
12 11
4.5
4.5
Atmospheric vent port
2 x Ø 2.6
Depth 12 or less
9.7
17
Lead wire with connector
25
41.71.5
55.8
Ø 17
Piping port G1/4M5 x 0.8
Thread depth 5
Gasket
25
41.71.5
64.8
Piping port URJ1/4
25
41.71.5
49.5
Piping port Rc1/8
25
41.71.5
Piping port TSJ1/4
58.8
F02L
C01L
N02L
02L
A2L
B2L
Dimensions
Piping directionPiping specifi cation
R1/4
G1/4 Rc1/8
NPT1/4
URJ1/4 TSJ1/4
ZSE20C(F)
ISE20C(H)
If there is a possibility that the atmospheric vent port of the switch will be exposed to water or
dust, insert a tube into the atmospheric vent port and route the other end of the tube to a safe
place away from water or dust.
∗ For tubing, please use the SMC TU0425 (polyurethane, O.D. Ø 4, I.D. Ø 2.5) for the
pressure switch.
∗
If it is expected that the pressure, such as water hammer or surge pressure, will fl uctuate rapidly,
refer to the precautions in the Operation Manual on the SMC website (http://www.smc.eu).
24
3-Screen Display High-Precision
Digital Pressure Switch For General Fluids
ZSE20C
(
F
)
/ISE20C
(
H
)
Series
ZSE20C(F)/ISE20C(H) ZSE20B(F)/ISE20B ZSE20A(F)/ISE20A ZSE20(F)/ISE20
Function
Details
To Next Page
Loading...
