Smeg BCC01 User Manual

EN - 6
We recommend setting the water
hardness upon first use. Please
see the “Water hardness settings”
paragraph for this reason.
After 20 minutes of non-use, the
machine switches off. If it has made
at least one coffee, it performs a
self-cleaning cycle. Press the button
(9) to switch on the machine.
Change of dispensing program
The machine has two dispensing menus in
its memory: White and Orange. To switch
from one program to another, press the key
(20) .
In the White menu all the keys are illuminated
in white, in the Orange menu, all the keys are
illuminated in orange.
For the specic functions of each menu, refer
to the paragraph “Description of controls and
alarms”
Turning off the machine the setting of
the White or Orange dispensing
menu remains in the memory at the
next restart.
Dispensing a drink
• It is possible to adjust the position of the
dispenser (11) according to the cup used.
For very high cups it is possible to remove
the drip tray (14).
• Place a cup or large cup under the
dispenser.
• Press the key for the desired function. For
each selected function, preparation stops
automatically. For specic functions, refer
to the paragraph “Description of controls
and alarms”.
• At the end of dispensing, all the keys light
up xed.
Use
Grinding adjustment knob (6) (Fig. D)
The appliance is equipped with a knob (6)
that allows you to adjust the grinding grain of
the coffee according to its uses:
Turning the knob (6) clockwise “A” increases
the grinding grain; turning the knob (6)
anticlockwise “B” decreases the grinding grain
and the ground coffee will be ner (Fig.D).
Turn the knob (6) and match the indicator (26)
with the desired grinding level.
The grinding grain adjustment must
be carried out when the grinder is
in operation or on rst use when
the bean container is completely
empty; turning the knob (6) with
the grinder stopped and the beans
inside could damage the grinding
unit.
USE (Fig. E-F-G-H)
• Lift the tank cover (4) and pour fresh water
in the tank (5) being sure not to exceed the
indicated ‘Max’ level. Replace the water
tank cover when full (4).
• Lift the coffee bean container lid (2) and
introduce the coffee beans into the container
(3).
• Check that the drip tray (14) is correctly
positioned.
• Press the button (9) , the machine starts
the heating phase and the keys light up
ashing in sequence.
At the end of the heating, a self-cleaning
cycle of the internal circuits is carried out
and, once the cycle is nished, the machine
is ready to be used.
At the rst use it is recommended to
make at least one coffee to make a
complete break-in of all the circuits.

Smeg BCC01 Specifications

General

Product type	Espresso machine
Built-in grinder	Yes
Capacity in cups	1 cups
Grinder capacity	150 g
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Country of origin	China
Appliance placement	Countertop
Water tank capacity	1.4 L
Maximum operating pressure	19 bar
Reservoir for brewed coffee	Cup
AC input voltage	220–240 V
AC input frequency	50 - 60 Hz
Auto power off after (max)	20 min
Package depth	265 mm
Package width	495 mm
Package height	445 mm
Package weight	7000 g
Quantity per pack	1 pc(s)
Cappuccino making	No
Control type	Buttons
Product color	Red
Housing material	Aluminium, Plastic
Pallet weight	168000 g
Quantity per pallet	24 pc(s)
Pallet GTIN (EAN/UPC)	8017709301002
Quantity per pallet layer	6 pc(s)
Number of layers per pallet	4 pc(s)
Pallet net width	800 mm
Pallet net height	1900 mm
Pallet net length	1200 mm
Pallet net weight	120000 g

Weight and Dimensions

Depth	433 mm
Width	180 mm
Height	336 mm
Weight	5000 g