EasyManuals Logo

Smeg BCC01 User Manual

Smeg BCC01
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
EN - 8
minute.
If 5 blue stripes appear on the strip, select
“light water” settings.
If 1 or 2 pink stripes appear on the strip, select
“average water” settings.
If 3, 4 or 5 pink stripes appear on the strip,
select “hard water” settings.
To open the water hardness settings,
simultaneously press and hold down keys
(16) and (20) for at least 3
seconds, LEDs (21) , (22) , (23)
will ash simultaneously.
Choose the water hardness, referring to the
following table, pressing the key
(16)
,
the LED relating to the selected hardness
lights up steadily, the others go off
.
Led Hardness
21
Light
22
Medium
23
Hard
To memorize the selected hardness,
press keys
(16)
and
(20)
simultaneously for at least 3 seconds or do
not press any key for 15 seconds
.
To prolong the machine operation
and preserve the aroma and taste of
the coffee, it is recommended to use
the Smeg Softener Filter (optional,
not supplied). For installation and
operation, follow the instructions
that accompany the accessory.
Once installed, set the water
hardness level to ‘Light’ following
the instructions in the previous
paragraph.
Cleaning and maintenance
CLEANING AND MAINTENANCE
(Fig. C-E-G-H-I-L)
Incorrect use Risk of damage to
surfaces.
Do not use steam jets to clean
the coffee machine.
Do not use cleaning products
containing chlorine, ammonia
or bleach on parts with metal
surface nishes (e.g. anodised,
nickel- or chrome-plated).
Do not use abrasive or corrosive
detergents (e.g. powder
products, stain removers and
metallic scourers).
• Do not use rough or abrasive
materials or sharp metal
scrapers.
Manual rinse
Make sure that the White program is
selected with keys (16), (17), (18), (19)
illuminated in white.
With the machine ready to dispense and
the drip tray mounted, press the keys (20)
and (19) simultaneously for at
least 3 seconds: the machine will rinse the
coffee circuit (coffee dispenser 11).
At the end of the washing cycle, the keys
light up steadily.
Cleaning of the machine body
For a good preservation of the external
surfaces it is necessary to clean them regularly
at the end of each use, after letting them cool.
Clean with a soft cloth dampened with water.
Never immerse the machine body
(1) in water or other liquids.

Other manuals for Smeg BCC01

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg BCC01 and is the answer not in the manual?

Smeg BCC01 Specifications

General IconGeneral
Product typeEspresso machine
Built-in grinderYes
Capacity in cups1 cups
Grinder capacity150 g
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Country of originChina
Appliance placementCountertop
Water tank capacity1.4 L
Maximum operating pressure19 bar
Reservoir for brewed coffeeCup
AC input voltage220–240 V
AC input frequency50 - 60 Hz
Auto power off after (max)20 min
Package depth265 mm
Package width495 mm
Package height445 mm
Package weight7000 g
Quantity per pack1 pc(s)
Cappuccino makingNo
Control typeButtons
Product colorRed
Housing materialAluminium, Plastic
Pallet weight168000 g
Quantity per pallet24 pc(s)
Pallet GTIN (EAN/UPC)8017709301002
Quantity per pallet layer6 pc(s)
Number of layers per pallet4 pc(s)
Pallet net width800 mm
Pallet net height1900 mm
Pallet net length1200 mm
Pallet net weight120000 g
Weight and Dimensions IconWeight and Dimensions
Depth433 mm
Width180 mm
Height336 mm
Weight5000 g

Related product manuals