EN - 9
EN
Use / Cleaning and maintenance
• Choose the water hardness, referring to the
following table, pressing the key
(22),
the
LED relating to the selected hardness lights
up steadily, the others go off
.
Led Hardness
27
Soft
28
Medium
29
Hard
• To memorize the selected hardness, press
keys
(22)
and
(26)
simultaneously for at least
3 seconds or do not press any key for 15
seconds
.
To prolong the machine operation
and preserve the aroma and taste of
the coffee, it is recommended to use
the Smeg Softener Filter (optional,
not supplied). For installation and
operation, follow the instructions
that accompany the accessory.
Once installed, set the
water hardness level to ‘Soft’
following the instructions in
the previous paragraph.
CLEANING AND MAINTENANCE
(Fig. B-D-E-F-G-I)
Incorrect use Risk of damage to
surfaces.
• Do not use steam jets to clean
the coffee machine.
• Do not use cleaning products
containing chlorine, ammonia
or bleach on parts with metal
surface nishes (e.g. anodised,
nickel- or chrome-plated).
• Do not use abrasive or corrosive
detergents (e.g. powder
products, stain removers and
metallic scourers).
• Do not use rough or abrasive
materials or sharp metal
scrapers.
Automatic rinse
After dispensing a coffee beverage or
beverage with milk, the machine automatically
rinses the dispenser nozzle (11) before turning
off.
To ease cleaning operations, it
is possible to scan the QR code
located inside the service door,
which opens a specific web
section dedicated to Cleaning and
Installation (g. I).
Manual rinse
• Make sure that the White program is
selected with keys (22), (23), (24), (25)
illuminated in white.
• With the machine ready to dispense and the
drip tray mounted, press the keys (25) and
(26) simultaneously for at least 3 seconds:
the machine will rinse the coffee circuit
(coffee dispenser 11).
To Next Page
Loading...
Need help?
General
