User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard EN 50242
Reference program
(*) Program
BIO (P3+P1) - models AAA-AAB
(*) Program
ECO (P3) - models BAB
Load 12 place-settings
Type of detergent B
Amount of detergent 30 g
Rinse aid setting 5/6
1.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"1. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
• The water supply tap is
open.
• The
correct amount of detergent
has been added to the
dispenser
.
• The baskets have been
correctly loaded.
• The spray arms are able to
rotate freely
and without
obstruction.
• The dishwasher door is
securely closed
.
LIGHTING
When the
ON/OFF
button
(1)
is pressed, the dishwasher switches on
and the light
(6)
comes on. About
2 seconds
later, the
PHASES/PROGRAM
lights
(10)
will come on.
To Next Page
Loading...
