Installation
26
Choice of location
Always install the appliance in a dry place
with satisfactory ventilation. Depending on
its climate class (stated on the nameplate
inside the refrigerator compartment), the
appliance can be used in different
temperature conditions.
• The appliance must not be installed near
heat sources. If this is not possible,
insulate properly.
• To ensure proper ventilation for your
appliance allow 1 ¼” (3 cm) space on
each side.
• If installed underneath wall units, at least
3” (7.6 cm) clearance must be left.
• Ensure that the appliance is located with
sufficient space for the door to open and
for the internal drawers and shelves to be
removed, if necessary. Leave 14 ½”
(36,8 cm) minimum on the hinge side to
allow for the door to swing open.
WARNING
Do not install this appliance:
• outdoor,
• in manufactured (mobile) homes, in
recreational vehicles (RVs) or boat.
• near a heater or flammable material.
Keep flammable materials and vapor,
such as gasoline, away from the
appliance.
• in a room where there is a risk of
freezing.
• in direct sunlight or exposed to heat from
stoves (if this is not possible, insulate
properly).
Class Room temperature
SN (Subnormal) + 50°F to + 89°F
N (Normal) + 61°F to + 89°F
ST (Subtropical) + 64°F to + 100°F
T (Tropical) + 64°F to + 109°F
To Next Page
Loading...
