EasyManua.ls Logo

Smeg FAB10 - Refrigerator thermostat adjustment; Fast Freezing Function

Smeg FAB10
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use
16
Refrigerator thermostat adjustment
The knob in the top right-hand corner of the
appliance is used to set the refrigerating
temperature.
When the knob is turned to 0, the
appliance is switched off.
The operational settings range from 1 to 5.
Positions 1 and 2 correspond to a lower
cooling power.
Positions 3 and 4 correspond to a
normal cooling power.
Position 5 generates the appliance
maximum cooling power.
In normal usage conditions you are advised
to select a medium-low setting (positions 1
or 2) for proper conservation of foodstuff in
the appliance.
Only select the highest settings (4 and 5) if
they are really necessary: with these
settings, the temperatures inside the
refrigerator compartment may be close to
0°C and electricity consumption will be
higher.
Fast Freezing Function
This function allows you to freeze large
quantities of stored food in the freezer
compartment.
Activate the function 24 hours before
storing food inside.
NOTE:
Increasing from position 1 to 5
temperature decreases in the
refrigerator compartment.
NOTE:
Regulation of the temperature of
the freezer compartment is
controlled by the main thermostat.
NOTE:
To save energy, after 24 hours
after inserting fresh food,
deactivate the function.

Related product manuals