Smeg FAB32 - Temperature and Mode Settings

Use
16
Temperature setting
1. To set the refrigerator temperature,
press the button; press the
button for the freezer.
2. The set temperature will be shown on
the relevant display.
Refrigerator supercold function
1. Press the button to activate/
deactivate the supercold function, the
relevant indicator turns on.
2. After 1 hour the supercold function is
switched off automatically. The
refrigerator compartment returns to its
previous setting.
Vacation function
Useful during periods of prolonged
absence; the Vacation function allows you
to turn off the refrigerator compartment
while keeping the freezer active.
1. To activate/deactivate the Vacation
function, keep the button pressed
for 3 seconds.
2. The indicator will turn on in the
display, and the temperature will not be
shown
.
ECO mode
1. To activate/deactivate the ECO mode,
keep the button pressed for 3
seconds.
2. The indicator will turn on in the
display.
3. The appliance will reduce power
consumption after 6 hours since the
activation of the ECO mode.
NOTE:
The refrigerator temperature can
be set between +34 °F and
+46 °F.
The freezer temperature can be set
between 0°F and -11 °F.
NOTE:
The refrigerator supercold function
is used for quick cooling of large
quantities of food.
NOTE:
Remove the stored products from
the refrigerator compartment.
NOTE:
To prevent the formation of
unpleasant odors, a temperature
of about 59 °F will be kept inside
the refrigerator compartment.
NOTE:
The ECO mode is deactivated
after a power failure or when the
appliance is switched off.
NOTE:
Activation of the supercold function
(refrigerator/freezer) deactivates
the ECO mode.