To Next PageTo Next PageHow to fix too cold temperature inside Smeg FAB5RRD Refrigerator section?
If the temperature inside your Smeg Refrigerator is too cold, it's likely that the cooling temperature regulator is set too high (meaning lower temperature). To resolve this, turn the regulator to a lower setting (1-2).
Why is there too much condensation forming in my Smeg FAB5RRD Refrigerator?
Excessive condensation in your Smeg Refrigerator can occur for several reasons. Ensure the door gaskets create an airtight seal; if cracked, try softening the gasket by gently pulling and sliding your fingers along the inside. Avoid opening the door frequently or for extended periods, especially in warm, humid conditions. Reduce the amount of fresh food, like fruits and vegetables, stored on the shelves. Also, ensure all foods are properly covered or stored in airtight containers.
What to do if Smeg FAB5RRD Refrigerator section is not cooled sufficiently?
If your Smeg Refrigerator isn't cooling enough, several factors could be the cause. First, check the inside temperature setting; if the thermostat is set too low (1-2), turn the regulator to an intermediate setting (3-4). Reduce how often and how long you open the door. Make sure food items aren't blocking the door from closing properly and that the refrigerator is level. Finally, examine the gasket for proper sealing and any damage if there's a rise in outside temperature.
General| Type | Refrigerator |
|---|---|
| Installation | Freestanding |
| Cooling type | Static |
| Hinge type | Standard |
| Hinge position | Right |
| Door color | Red |
| Handle color | Chrome |
| Color | Red |
| Energy Class | A+ |
| Energy efficiency class | A+ |
| Number of Shelves | 1 |
| Number of Door Bins | 2 |
| Reversible Door | No |
