Installation
42
Positioning and levelling
• After making the gas and electrical
connections, screw on the four feet
supplied with the appliance.
The appliance must sit level on the floor to
ensure stability.
• Screw or unscrew the bottom part of the
foot until the appliance is stable and
level on the floor.
Fastening to the wall
1. Screw the wall fastening plate to the rear
of the appliance.
2. Adjust the height of the 4 feet.
Heavy appliance
Risk of damage to the appliance
• Insert the front feet first and then the rear
ones.
The anti-tip devices must be
installed in order to prevent the
appliance tipping over.
To Next Page
Loading...
