EasyManua.ls Logo

Smeg SAI613B - Timer Settings and Automatic Cooking

Smeg SAI613B
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Setting and modification of the cooking time :
Action Control panel Display
Zone selection Press on the “SLIDER“ [ 0 ] and control
across from the desired zone light on
Select the power level Slide on the “SLIDER“ [ 1 ] to [ 9 ]
Select « Timer » Press on the [ ] [ 00 ]
Set the tens Press on the [ ] [ 10, 20, 30, ... ]
Set the units Slide on the “SLIDER“ [ 31, 32, 33, 34, 35, ...]
The time is confirmed and the cooking starts.
To stop the cooking time :
Action Control panel Display
Zone selection Press on the “SLIDER“ [ 0 ] and control
across from the desired zone light on
Select « Timer » Press on the [ ] [ 00 ]
Desactivate « Timer » Slide on the “SLIDER“ to [ 0 ] [ 00 ]
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ ].
Egg timer function :
Example for 29 minutes :
Action Control panel Display
Activate the hob Press display [ 0/I ] Zone control lights are on
Select« Timer » Press display [ CL ] [ 00 ]
Set the units Slide on the “SLIDER“ to [ 9 ] [ 0 fixed ] [ 9 blinking ]
Valid the units Press display [ 09 ] [ 0 blinking ] [ 9 fixed ]
Set the tens Slide on the “SLIDER“ to [ 2 ] [ 2 blinking ] [ 9 fixed ]
Valid the tens Press display [ 29 ] [ 29 ]
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer displays blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, then reduces automatically its power on the pre-selected level.
Start-up :
Action Control panel Display
Zone selection Press display [ 0 ] selected [ 0 ] and control light on
Full power setting Slide on the “SLIDER“ to [ 9 ] Pass from [ 0 ] to [ 9 ]
Automatic cooking Re-press on display “SLIDER“ [ 9 ] [ 9 ] is blinking with [ A ]
Power level selection Slide on the “SLIDER“ to [ 7 ] [ 9 ] pass to [ 8 ] [ 7 ]
(for example « 7 ») [ 7 ] is blinking with [ A ]
Switching off the automatic cooking :
Action Control panel Display
Zone selection Press [ 7 ] from the zone [ 7 ] blinking with [ A ]
Power level selection Slide on the “SLIDER“ [ 1 ] to [ 9 ]

Related product manuals