EasyManua.ls Logo

Smeg SAI613B - Special Functions and Control Panel Lock

Smeg SAI613B
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Stop&Go function
This function brakes all the hob’s cooking activity temporarily and allows restarting with the same
settings.
Startup/stop the pause function :
Action Control panel Display
Engage pause press [ II ] key displays [ II ] in the
during 2s heating zone displays
Stop the pause press [ II ] key pause control light is
during 2s blinking
press an other touch or pause control light is off
slide on the “SLIDER“
Recall Function
After switching off the hob (0/I), it is possible to recall the last settings.
cooking stages of all cooking zones (power)
minutes and seconds of programmed cooking zone-related timers
Keep warm function
The recall procedure is following:
Press the key [0/I]
Then simultaneously press the 2 zones back in less than 6 seconds.
The previous settings are again active.
« Keep warm » Function
This function allows to reach and maintain automatically a temperature of 70°C.
This will avoid liquids overflowing and fast burning at the bottom of the pan.
To engage, to start the function « Keep warm » :
Action Control panel Display
To engage press the slider between [ U ]
[ 0 ] and [ 1 ]
To stop slide on the “SLIDER“ [ 0 ] to [ 9 ] or [ H ]
Control panel Locking
To avoid modification of the setting of the cooking zones , in particular during cleaning, the
control panel can be locked (with exception to the On/Off key [ 0/I ]).
Lock :
Action Control panel Display
Start press on key [ 0/I ] [ 0 ] or [ H ] on displays
Hob locking press on key [ ll ] and keep your
finger on this key, with your other
finger press 3 times key [ ] [ L ] on displays
Unlock :
Action Control panel Display
Start press on key [ 0/I ] [ L ] on displays
In the 5 seconds after start:
Unlocking the hob press on key [ ll ] and keep your
finger on this key, with your other
finger press 3 times key [
] [ 0 ] or [ H ] on displays

Related product manuals