40
Instructions for the User
8. USING THE PIZZA FUNCTION (ON SOME
MODELS ONLY)
This appliance is equipped with a function specially developed for cooking
pizza. This function is identified by the symbol on the oven functions
knob. To cook a pizza, proceed as described below.
With the oven cold, remove the circular cover from the bottom of the
oven (fig. 1) and fit the pizza plate in its place (Fig. 2).
1) 2)
Set the oven functions knob on the symbol and the thermostat knob on
250°C. Preheat with these settings until the thermostat light goes out, then
place the pizza on the special plate. It does not normally take more than 3-
4 minutes to cook a pizza to perfection, although this time may vary
depending on the dough used or individual taste.
8.1 Precautions for using the pizza plate
• Never use the pizza plate except as described above (for example,
never use it on gas or ceramic hobs, or on ovens not designed to take
this accessory).
• The pizza plate may be left in place while conventional cooking
operations are in progress. Simply place the cover over it, taking care
to fit it securely.
• Never use any oven function if the pizza plate is not in position.
• The appliance becomes very hot during use. Oven gloves should
always be worn.
• If you like oil on your pizza, it is best to add it after removal from the
oven since oil stains on the pizza plate are unsightly and may reduce
its efficiency.
To Next Page
Loading...
Need help?
General
