Smeg SC112 - Rotisserie Cooking

28
Instructions for the user
ROTISSERIE COOKING (ON PYROLYTIC MODELS ONLY)
Prepare the rotisserie rod with the food, tightening the screws A of the prongs. Fit the
frame B onto the second runners from the bottom. Remove the handle D and position
the rotisserie rod so that the pulley E is still in the guides on the frame B. Push the
frame B fully in until the tip of the rotisserie rod enters the hole C on the rear wall of
the oven. Place a basin F on the bottom shelf and pour a little water into it to prevent
smoke from forming.