www.smeguk.com
HOW TO:
SECONDARY MENU:
SET AN END COOKING TIME
• After selecting the cooking function and temperature proceed as previous section in ‘How to set duration cooking’.
• Once the desired cooking duration has been set press button and the sum of the current time and the
cooking time will appear.
• Press the or button to increase or decrease the time, each line represents 1 minute.
• The current time and the A and symbols will appear on the display panel.
• At the end of the cooking time the buzzer will sound and the oven will automatically switch off.
Selected models have a secondary menu that allows you to modify some of the ovens settings. These include
child lock, showroom mode, Eco logic and Eco light modes.
CHILD LOCK will stop a child from accidently switching the oven on. The appliance will lock the controls
automatically after 1 minute. The oven will not heat up suffi ciently to cause injury.
When this mode is active this symbol will appear on the display panel . This will become on bloc or off bloc
on the menu.
SHOWROOM MODE is used for demonstrating the products in Showrooms. The elements are not heated,
but the display panel can be set for cooking. When this mode is activated this symbol will appear on the display
panel . This will become Off Show or On Show on the menu.
THE ECO LOGIC MODE uses less power, to reduce energy bills. This is useful if other appliances in the
cooking area require more power than is available. Cooking times will be lengthened. This logo will be
highlighted in the display panel when this mode is activated. This will become High power or Low Power on the
menu.
KEEP WARM MODE keeps the oven on for a period of time after the oven has fi nished cooking at a low
temperature. This will become Off hold or On hold on the menu.
THESE MODELS HAVE A SECONDARY MENU: SF109 / SFP109 / SFP125 / SFP390 / SF390 /
SC45MC / SC45M / SC45VC / MP122 / DOSP38X / S45MC / S45M / S45VC / MP322 / MP422
HOW TO ENTER THE SECONDARY MENU
• When the oven is on standby turn the far left control knob, to activate the light.
• Press and hold down the control for at least 5 seconds
• Options for the secondary menu will appear and can be changed by moving the dial to the right.
• Once the desired option is found, press in the dial to select this option. Turn the dial right or left
to turn the option on or off.
SUPER START GUIDE
To Next Page
Loading...
Need help?
General
