www.smeguk.com
SMEG OVEN
PREPARING THE OVEN
• Remove any packaging from inside and outside of the oven.
• Remove the pack including baking trays and metal shelves. Place into the oven cavity:
Don’t forget to
heat the oven to a
high temperature
for 30 minutes
prior to fi rst use.
This will ensure
any manufacturing
residues are
burnt off.
Wash all baking
trays and wire
racks before use.
*The roof liner is placed over
the grill and centralised
*only on selected models
The metal rack has the guard
upwards at the back of the oven
*The telescopic rails are clipped
into place on the metal runners
The tray rack is positioned over
the top of the tray
The trays have the slanted slope
with the easy to pull lip at the
front of the oven
FOR THE FIRST TIME: QUICK TIP
SUPER START GUIDE
To Next Page
Loading...
Need help?
General
