Smeg SE332EB - Control Panel; Use; Preliminary Operations; Basic Functions

28 - USE 91477A870/A
*Power levels are approximate and may vary according to the settings made and the mains voltage.
Control panel
Symbols
Cooking zones
USE
Preliminary operations
• Remove any protective film from the outside
or inside of the appliance, including any
accessories (if present).
• Remove any labels (apart from the technical
data plate).
Basic functions
First power connection
When connected to the power supply for the
first time, or after power has been switched
back on after a power failure, an automatic
check is carried out that control turns on the
indicator lights and the displays for a few
seconds. Afterwards, the appliance can be
used normally.
Switching on and off
To switch on the hob, hold down the ON/OFF
key for 1 second.
If no cooking zone is activated within 5 seconds
of switching on, the hob switches off
automatically.
Using the hob
Switching on a single cooking zone
1. After switching on the hob, use the Increase
button to activate the required cooking
zone. The symbol appears on the
display.
5 214 2200 148 1000 - -
6 oval plate 2200 170 1400 - -
71992000----
8 184 1700 124 700 - -
9 oval plate 2000 148 1100 - -
Zone
Outer diameter
(mm)
Maximum
power draw
(W)*
Inside diameter
(mm)
Maximum
power draw
(W)*
Middle
diameter (mm)
Maximum
power draw
(W)*
ON/OFF button
Turns the hob on or off.
Control lock button
Activates or deactivates the controls lock
if pressed for 3 seconds.
Increase button
Increases the power level or cooking
time.
Decrease button
Reduces the power level or cooking
time.
Timer button
Activates the timer for the automatic
shutdown/minute minder function.
Front left
Rear left
Central
Rear right
Front right
Central right
Front (30 cm model only)
Rear (30 cm model only)
See General safety instructions.