Smitec COSMOS 302 Series - User Manual

COSMOS 302X series servo drives / inverters Installation, use and maintenance manual - EN
Ver. 1.01 1
Smitec S.p.A., viale Vittorio Veneto 4, 24016 San Pellegrino Terme (BG), Italy, www.smitec.it
Installation, use and maintenance manual
SERVO-DRIVES
COSMOS 302X SERIES
BEFORE STARTING UP THE SERVO-DRIVES COSMOS 302X SERIES, CAREFULLY
READ THIS MANUAL AND FOLLOW ALL INSTRUCTIONS, IN ORDER TO ENSURE
MAXIMUM SAFETY
I dati tecnici e i disegni riportati nel presente manuale potrebbero aver subito delle modifiche
successive; fare sempre riferimento all'ultima versione disponibile.

Summary

1 Preface

2 General warnings

3 Safety instructions

3.1 General information

Provides general information and user responsibilities for the servo-drive.

3.2 Precautions during handling and assembly

Details safety measures for handling and assembling the equipment.

3.3 Precautions against risk of Electric Shock

Outlines safety procedures to prevent electrical shock hazards during operation and maintenance.

3.4 Precautions against hot components

Warns about hot surfaces and necessary precautions to avoid burns.

4 Data sheet

4.1 Description

Overview of the COSMOS 302X series servo-drives, highlighting key features and design.

4.2 Reference documents

Lists associated documentation for the COSMOS 302X series servo-drives.

4.3.1 Environmental characteristics

Specifies operating and storage conditions: temperature, humidity, altitude, and pollution degree.

4.3.2 Power supplies

Details main and auxiliary power supply voltages, current ratings, and protection features.

4.3.3 Motor outputs

Defines voltage, switching frequency, and current for motor connections.

4.3.4 Digital inputs

Describes the number, type, and frequency of digital inputs for sensor integration.

4.4 Configurations; order codes

Explains how to interpret model numbers and order codes for specific configurations.

4.5 Model code

Details the alphanumeric model code structure and its meaning for device features.

4.6 Accessories

Lists available accessories and order codes for the COSMOS 302X series.

4.7 Electromagnetic compatibility (EMC)

Covers EMC compliance requirements and installation conditions according to IEC 61800-3.

4.8 Mechanical specifications

Provides weight and dimensional drawings for the servo-drive units.

5 Installation and start-up

5.1 Preliminary operations

Ensures equipment integrity and manual availability before installation.

5.2 Positioning and installation

Guidelines for mounting the servo-drive in a closed electrical operating area.

5.3 Electrical connections

Details the procedures for making electrical connections to the servo-drive.

5.3.1 Connection

Illustrates connector and terminal block arrangements for various connections.

5.3.2 Motor wiring

Details the pin configuration and cable specifications for motor connections.

5.3.3 Auxiliary power supply and 24 V digital inputs

Explains connections for 24V auxiliary power and digital inputs.

5.3.4 Incremental encoder

Describes the pinout and connection scheme for incremental encoders.

5.3.5.1 Manual addressing

Details manual address setting for FLxIO bus devices using a rotary switch.

5.3.5.2 Automatic addressing

Notes the current status of automatic addressing for FLxIO bus.

6 Firmware update

7 Storage

8 Maintenance

9 Disposal and demolition

Smitec COSMOS 302 Series Specifications

General

Brand	Smitec
Model	COSMOS 302 Series
Category	Servo Drives
Language	English