4
Offset options
Each neck is made with a 12/14 taper for use with compatible cobalt chrome, ceramic
and OXINIUM™ heads. The circulotrapezoidal neck is designed for increased range of
motion. The following table and illustrations show the total offset and height for each
REDAPT™ stem.
Offset option (standard is +0 head center)
Size (mm)
SO Neck HO Neck
Height (mm) Offset (mm) Height (mm) Offset (mm)
12-15
33 37 33 45
16-27
35 42 35 50
Offset
Height
Figure 2
Sizing options
Sizes 12 – 27mm
Standard and high offset
300mm
Sizes 12 – 27mm
Standard and high offset
240mm
Sizes 12 – 21mm
Standard and high offset
190mm
To Next Page
Loading...
