To Next PageTo Next Page
Need help?Do you have a question about the smith&nephew SPIDER2 and is the answer not in the manual?
General| Product Name | SPIDER2 |
|---|---|
| Category | Medical Equipment |
| Type | Limb Positioner |
| Material | Stainless Steel and Aluminum |
| Compatibility | Compatible with most operating tables |
| Sterilization | Autoclavable |
| Intended Use | Used for positioning limbs during orthopedic surgeries |
The SPIDER2 is used to position limbs during surgical procedures.
Includes quick connect, drape, and pedal connection points.
Describes the joints and knobs for positioning and clamping.
Covers battery, power switch, and indicator light.
Instructions for charging the SPIDER2 battery before initial use.
Steps for connecting the charged battery to the SPIDER2.
Procedure for turning the SPIDER2 on for the first time.
Steps for securing the SPIDER2 clamp to an OR table rail.
Procedure for ensuring the clamp is rigidly attached to the rail.
How to reposition the SPIDER2 using the Dumbbell Joint adjustment.
Adjusting the handle for optimal clamp positioning.
Steps for moving the patient's limb to the desired position.
Procedure for detaching the SPIDER2 from the table rail.
Guidance on proper storage to preserve device life.
Explanation of the SPIDER2's indicator light states and their meanings.
Steps for safely changing the battery during or outside surgery.
Actions to take when the indicator shows low battery energy.
How to connect the battery charger to power.
Steps for placing the battery pack on the charger and monitoring its status.
Meaning of the indicator light signals on the battery charger.
Guidelines for cleaning the SPIDER2 and its components.
Information on what methods are not permitted for sterilization.
Steps for storing the SPIDER2 to ensure longevity.
Guidance on who should perform maintenance on the SPIDER2.
List of available accessories for the SPIDER2 system.
Details on various stabilization kits for the SPIDER2.
Details on RF emissions and their compliance levels.
Recommendations for the intended electromagnetic environment.
Guidelines for maintaining safe distances from RF transmitters.
Test levels for electromagnetic immunity according to IEC 60601.
Environment guidance related to electromagnetic immunity.
