EasyManua.ls Logo

smith&nephew VULCAN - User Manual

smith&nephew VULCAN
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VULCAN™ Generator
Operations/Service Manual
Question and Answer IconNeed help?

Do you have a question about the smith&nephew VULCAN and is the answer not in the manual?

Summary

Preface

Introduction

Device Description

Indications for Use

Contraindications

Warnings

Precautions

Unpacking and General Inspection

Front Panel Layout

Rear Panel Layout

Preoperative Setup

Operational Modes

Power Delivery Modes

Temperature Control Mode

Details how the generator operates in Temperature Control Mode, adjusting power to maintain tissue temperature.

Power Control Mode

Explains the Power Control Mode for cutting, ablation, and hemostasis, allowing adjustment of SET CUT and SET COAG.

Controls and Functions

Auto Probe Recognition

Explains how the generator automatically recognizes connected probes and adjusts settings accordingly.

Instructions for Use

Cleaning and Sterilization

Service and Maintenance

Service Philosophy

States that repairs and adjustments are to be performed by authorized service centers only.

Replacing Fuses

Details the procedure and safety precautions for replacing the fuses in the VULCAN Generator.

Software Upgrades

Information on how to obtain and perform software upgrades for the VULCAN Generator.

Replacing;Returning Worn or Defective Equipment or Parts

Instructions for ordering replacement parts and returning defective equipment for service.

Preventative Maintenance

Outlines annual inspections required to ensure the safe operation of the VULCAN Generator.

Calibration of Temperature Measurement Circuit

Describes the procedure for manually checking the calibration of the generator's temperature measurement circuit.

Troubleshooting

Generator Control Unit

Guides users on how to diagnose issues with the generator control unit using the message display.

Alarm and Fault Messages

Explains the types of alarms and faults detected by the generator and how they are indicated.

Observed Problems

Provides remedies for common operational issues not indicated by specific alarms or fault messages.

Technical Specifications

Ordering Information

Output Charts

Guidance and Manufacturers Declaration

Electromagnetic Emissions

Details compliance with standards for electromagnetic emissions and guidance for the intended electromagnetic environment.

Guidance for Separation Distances

Recommends minimum separation distances for RF communication equipment to prevent interference.

Electromagnetic Immunity

Outlines the generator's immunity to electromagnetic disturbances and the required compliance levels.

Warranty

Service Replacement Units Warranty

Specifies the warranty coverage for Smith & Nephew service replacement units.

Service Replacement Program

Describes Smith & Nephew's program for providing replacement units to minimize downtime.

Repair Service Program

Details the process for obtaining repair services for devices no longer under warranty.

smith&nephew VULCAN Specifications

General IconGeneral
CategoryMedical Equipment
ManufacturerSmith & Nephew
Product NameVULCAN
TypeElectrosurgical Unit (ESU)
Power OutputUp to 300W
ModesCut, Coagulate, Blend
CompatibilityCompatible with various electrosurgical instruments

Related product manuals