26 1061526 Rev. C VULCAN™ Generator Operations/Service Manual
Ordering Information
Ordering Information
Each Smith & Nephew VULCAN™ Generator
system (country specific) includes a VULCAN
Generator, country-specific power cord, footswitch,
and country-specific Operations/Service Manual.
The International System (REF 7210869) includes a
European Continental power cord.
REF Description
7210868 Smith & Nephew
VULCAN Generator System, U.S.
72201480
Smith & Nephew
VULCAN Generator System, German
72201481
Smith & Nephew
VULCAN Generator System, Spanish
72201482
Smith & Nephew
VULCAN Generator System, French
7210872 Smith & Nephew
VULCAN Generator System, Italian
72201484
Smith & Nephew
VULCAN Generator System, Swedish
72201485
Smith & Nephew
VULCAN Generator System, Dutch
72201486
Smith & Nephew
VULCAN Generator System, Portuguese
72201487
Smith & Nephew
VULCAN Generator System, Danish
72201488
Smith & Nephew
VULCAN Generator System, Norwegian
72201489
Smith & Nephew
VULCAN Generator System, Korean
7210870 Smith & Nephew
VULCAN Generator System, UK
7210869 Smith & Nephew
VULCAN Generator System,
International
7210812 Smith & Nephew
VULCAN Generator
7209693
Smith & Nephew
VULCAN Extension Cable
7209692 Smith & Nephew
VULCAN Footswitch
7209687 Split Grounding Pad
7209597 Probe Tip Bender
CAUTION: Inspect all components, including
extension cables and power cord, regularly for wear.
Pay particular attention to extension cable insulation.
Replace if evidence of deterioration is noted.
CAUTION: The Smith & Nephew VULCAN™ Generator
is designed specifically for use only with Smith &
Nephew arthroscopic radiofrequency probes. Do not
use other devices with the generator control unit.
Note: Smith & Nephew VULCAN Extension
Cables may only be reused in accordance with
the instructions in the “Cleaning and Sterilization”
section.
Note: Contact Smith & Nephew or visit the
Smith & Nephew web site for the most current
list of available arthroscopic RF products.
IMPORTANT: Accessories connected to the
generator control unit must be capable of
withstanding the highest RF peak voltage output.
Refer to “Output Charts” section for suitable ratings
prior to connection and/or RF application.
To Next Page
Loading...
