1) Water tank mount
2) Air exhaust outlet (back)
3) Control panel
4) Housing body
5) Frying basket’s drawer
6) Air exhaust outlet (bottom)
7) Feet
8) Drip tray
9) Removable grill plate insert
10) Water tank (detached view)
11) Water tank cap
12) Drawer handle
13) Frying basket’s drawer (detached view)
Water system tank:
B) Filling the water system tank C) Fitting the water system tank
The water tank is required for the steaming mode. Please ensure it is fully filled
before each use and placed into the water tank mount.
1. Remove the water tank from the water tank mount on the top of the appliance.
2. Unscrew the water tank cap.
3. Add 1 litre of distilled or purified tap water to the water tank.
4. Screw the water tank cap back onto the water tank.
5. Place the water tank back onto the water tank mount on the top of the appliance.
Ensure to clean the water tank if it is unused for an extended period of time. Residual
water and other liquids are prone to mildew.
Do not put anything except distilled or purified tap water into the water tank to avoid
any malfunctions.
In order to maintain high heating efficiency and food hygiene, it is recommended to
use distilled or purified tap water.
To Next Page
Loading...
