smith+nobel SNDF275R - Troubleshooting (Continued); Fresh Fries Cooking Problems; Error Codes on Display; Specifications

14
Troubleshooting
Specications
Power Supply 220-240V ~ 50Hz
Power Consumption 1800W
NOTE: As a result of continual improvements,the design and specications of the product
within may differ slightly from the unit illustrated on the packaging.
Problem Possible cause Solution
Fresh fries are
fried unevenly
in the fryer
You did not use the right
potato type.
You did not rinse the
potato fries properly
before you fried them.
Use fresh potatoes and make sure that they stay
rm during frying.
Rinse the potato fries properly to remove starch
from the outside of the fries.
Fresh fries are
not crispy when
they come out
of the fryer
The crispiness of the fries
depends on the amount
of oil and water in the
fries.
Make sure you dry the potato fries properly before
you add the oil.
Cut the potato fries smaller for a crispier result.
Add slightly more oil for a crisper result.
E1 appears on
LED display
The sensor open circuit. Repair and don not use.
Repairs should only be performed by qualied
personnel in order to avoid a hazard.
E2 appears on
LED display
The sensor short circuit. Do not use and repair
Repairs should only be performed by qualied
personnel in order to avoid a hazard.