Smiths Medical level 1 User Manual

Convective Warmer
Chauffage convectif
Konvektives Wärmegerät
Riscaldatore a convezione
Calefactor convectivo
Aquecedor convectivo
Convectieve verwarmer
Konvektionsvärmare
Konvektionsvarmer
Konveksjonsvarmer
Lämpöpuhallin
Θερμοπομπός
Konvekční ohřívač
Konvektívny ohrievač
Konvekciós melegítőkészülék
Ogrzewacz konwekcyjny
Konvektiivne soojendi
Konvektīvā sildītāja
Konvekcinis šildytuvas
Конвекторен нагревател
Dispozitiv de încălzire prin convecție
Konvekcijski grelnik
- Operator’s Manual
. Manuel d’utilisation
/ Bedienungsanleitung
0 Manuale dell’operatore
1 Manual del operador
2 Manual do operador
3 Gebruikershandleiding
4 Bruksanvisning
5 Brugervejledning
6
Operatørhåndbok
7 Käyttöohjekirja
8 Εγχειρίδιο χειριστή
< Uživatelská příručka
= Príručka operátora
? Kezelői kézikönyv
> Podręcznik obsługi
A Kasutusjuhend
B Lietotāja rokasgrāmata
D Operatoriaus vadovas
N Ръководство за оператора
G Manual de operare
C
Uporabniški priročnik

Smiths Medical level 1 Specifications

General

Dimensions	15.5"H x 13.5"W x 17.5"D (39.4 cm x 34.3 cm x 44.5 cm)
Weight	28 lbs (12.7 kg)
Temperature Range	90°F - 160°F (32°C - 71°C)
Capacity	Up to 4 liters of irrigation fluid or 1 liter bag of blood/IV fluid
Power	115 VAC, 60 Hz, 2.0 A or 230 VAC, 50 Hz, 1.0 A
Material	Not specified in available documentation.
Warranty	1 year

Summary

About this Manual

Indications for Use

States the intended purpose of the warmer for preventing and treating hypothermia.

Conventions Used in this Manual

Explains text and text conventions used in the manual for clarity.

Description

Convective Warmer Components Overview

Introduces the main components of the warmer, including handle and control panel.

Rear View and Hose Attachment Details

Details the rear view ports, clamp, and hose connection points.

Important Safety Information

General Warnings

Lists initial safety warnings regarding thermal injury, electrocution, and grounding.

Continued Warnings

Provides further warnings covering operation, maintenance, and specific patient care scenarios.

Patient Care Warnings

Highlights warnings specific to patient monitoring, breathing, and wound care.

Precautions

Lists precautions to prevent device malfunction, failure, or damage.

User Interface

Control Panel Overview

Describes the warmer's control panel, including buttons and indicators.

Controls, Indicators, and Displays

Defines each control, indicator, and display for operational understanding.

Initial Setup and Daily Use

Assembly and Initial Setup

Outlines the process for assembling and preparing the warmer for use.

Step 1: Unpack the Convective Warmer

Details how to unpack and verify all components are present and undamaged.

Step 2: Attach the Hose to the Convective Warmer

Provides instructions for correctly connecting the hose to the convective warmer.

Step 3: Install the Convective Warmer

Explains how to install the warmer on a surface, pole, or cart.

Step 4: Perform Electrical, Functional, and Safety Tests

Details the necessary electrical, functional, and safety tests before operation.

Daily Use - Power and Blanket Selection

Covers plugging into power and selecting the appropriate warming blanket.

Daily Use - Hose and Sheet Clip Attachment

Describes attaching the hose to the blanket and the sheet clip to the patient's sheet.

Step 5: Using the Convective Warmer

Guides on starting therapy, adjusting settings, and monitoring the patient.

Step 6: After Use

Outlines the procedure for putting the system in standby and preparing for cleaning.

Step 7: Storage

Provides instructions for storing the convective warmer in a suitable environment.

Cleaning/Maintenance

Cleaning the Convective Warmer and Hose

Step-by-step guide for cleaning the warmer and its hose after use.

Disinfectant Agents

Lists approved disinfectant agents suitable for cleaning the warmer's enclosure.

Replace Air Filter

Explains when and how to replace the air filter to maintain performance.

Troubleshooting

Troubleshooting - Common Issues

Lists common problems and their potential causes and solutions for the warmer.

Troubleshooting - System Alerts and Errors

Addresses system alerts, errors, and operational issues with the warmer.

Troubleshooting - Electromagnetic Interference

Discusses interference issues and their resolutions based on standards.

Specifications

System Design Specifications

Details product safety, EMC, and other design standards compliance.

Physical Specifications

Lists physical dimensions, weight, and hose/cord lengths of the warmer.

Environmental and Thermal Specifications

Covers operating conditions, altitude, and thermal settings.

Electrical Specifications

Details power input, current, and fuse requirements for the warmer.

Alarm Specifications

Explains different alarm types, their indicators, and system states.

Electromagnetic Emissions Declaration

Provides guidance on electromagnetic emissions and compliance with standards.

Electromagnetic Immunity Declaration

Details electromagnetic immunity test levels and guidance for the warmer.

Radiofrequency Electromagnetic Immunity

Explains RF immunity test levels and recommended separation distances.

Electromagnetic Environmental Recommendations

Provides recommendations for separation distances from RF equipment.

Symbols

Product Symbols and Definitions

Explains various symbols used on the product and in labeling for identification.

EC REP and Safety Symbols

Defines symbols related to European representation and safety compliance standards.

Limited Warranty

Warranty Coverage and Procedure

Details parties covered, warranty performance, and conditions for claims.

Limitations and Exclusions

Outlines limitations and exclusions to the product warranty as per the manufacturer.

Service

Non-Warranty Work and Documentation

Explains service procedures for out-of-warranty devices and available documentation.

Disposal and Service Contacts

Provides information on proper disposal and contact details for service inquiries.