23
Bluetooth operating instructionst
Connection:
Step 1: Switch the input source in the SETTING MENU or press the Bluetooth
button of the remote;
Step 2: Turn on the Bluetooth function of the mobile phone, search for
“VMV A2", and tap to pairing. When the mobile phone displays
“connected", it has been successfully connected.
Re-connection:
When you had lost the connection with the A2, for example,going out, and
back home, some phones will not re-connect the A2 if the A2 has not
been re-boot, so you can press the Bluetooth button (FN) on the remote to
Re-connect.
Clear pairing: Long press the “Bluetooth" button(FN) on the remote control. After clearing
the pairing, some phones may no longer be able to search for “VMV A2". In
this case, you need to delete the Bluetooth device “VMV A2" which saved in
the phone, and then search and pairing again.
This product is equipped with a Bluetooth button, which is the FN
button on the remote control,The functions of this button include:
Short press: Switch directly to Bluetooth input, if Bluetooth loses connection, it is
a reconnect;
Long press: Disconnect the current device and allow pairing with other devices.
To Next Page
Loading...
