EEDM596F
Advanced Digital Multimeter
With Color LCD and Bluetooth
EEDM596F-Z Rev.
(05/19)
11
Measuring uA and mA AC
Range: 0.00 – 400 milliamps AC
CAUTION!
Do not attempt to make a current
measurement with the test leads connected
in parallel with circuit to be tested. Test
leads must be connected in series with the
circuit.
WARNING!
Do not attempt to make a current
measurement of circuits with more than
600V present. Instrument damage and/or
personal injury may result.
Rotary switch positions
Up to 400uA Up to 400mA
Selecting the AC mode
Press this button so the AC symbol is on the LCD.
Test lead connection
COM – Black Test Lead
mAuA – Red Test Lead
Optional functions
Activates manual ranging. Hold in for 2 seconds
to return to auto range.
Activates the Min/Max/Ave Record mode.
Hold in for 2 seconds to deactivate.
Toggles between +/- trigger in IP or IG function.
Activates relative mode.
Hold in for 2 seconds to deactivate.
Activates Data Hold on non-automotive
functions. Press again to deactivate.
Hold down for 2 seconds to activate 1mS Peak
Hold on DC volt and DC current functions.
Measuring Amps DC
Range: 0.00 – 10 Amps DC
CAUTION!
Do not attempt to make a current
measurement with the test leads connected
in parallel with circuit to be tested. Test
leads must be connected in series with the
circuit.
WARNING!
Do not attempt to make a current
measurement of circuits with more than
600V present. Instrument damage and/or
personal injury may result.
Rotary switch position
Test lead connection
COM – Black Test Lead
A – Red Test Lead
Optional functions
Activates manual ranging. Hold in for 2 seconds
to return to auto range.
Activates the Min/Max/Ave Record mode.
Hold in for 2 seconds to deactivate.
Toggles between +/- trigger in IP or IG function.
Activates relative mode.
Hold in for 2 seconds to deactivate.
Activates Data Hold on non-automotive
functions. Press again to deactivate.
Hold down for 2 seconds to activate 1mS Peak
Hold on DC volt and DC current functions.
To Next Page
Loading...