EEDM596F
Advanced Digital Multimeter
With Color LCD and Bluetooth
EEDM596F-Z Rev.
(05/19)
4
Controls and Functions
LCD Display
40,000 count, 2 times/sec update rate
Push Buttons
Select optional functions
Activates manual ranging. Hold in for 2 seconds
to return to auto range.
Toggles between 2 or 4 stroke in IP or IG function.
Activates the Min/Max/Ave Record mode.
Hold in for 2 seconds to deactivate.
Toggles between +/- trigger in IP or IG function.
Activates relative mode.
Hold for 2 seconds to return to auto range.
Advances the trigger level in IP and IG functions.
Toggles between AC or DC on Volt and Current
functions.
Toggles from 1 - 12 cylinders in IG function.
Activates LPF (Low Pass Filter) on AC or DC volt
functions.
Activates NR (Noise Reduction) on IP and IG
functions.
Activates Data Hold on non-automotive
functions. Press again to deactivate.
Activates 1mS Peak Hold on DC volt and DC
current functions
Activates wireless communication to remote iOS
and Android apps.
Toggles between Continuity Buzzer or Diode test.
Toggles between ºC or ºF on Temperature.
Toggles between RPM, mS pulse width, duty
cycle, or dwell angle on IG function.
Activate “Mute” mode (see page 5).
Disable auto power of
(see page 5).
Rotary Switch
Selects the measurement function
OFF
Turns the multimeter off.
LPFV
DC/AC Volts, Low Pass Filter (LPF)
mV
DC/AC millivolts (0.001 Volts)
Ω
Ohm, Continuity Buzzer, Diode Test
Hz
Frequency
TEMP
Temperature
μA
DC/AC microamps (0.000001 Amps)
mA
DC/AC milliamps (0.001 Amps)
A
DC/AC amps
Capacitance
IP
Inductive Pick-up RPM
IG
Ignition functions
Input Jacks
Test Lead Connections
Red test lead connection for measuring
AC/DC Amps
Red test lead connection for measuring
AC/DC mA, μA, and Temperature.
Black test lead connection for all
measurements
Red test lead connection for measuring
AC/DC volts, resistance, frequency,
continuity, diode test, and capacitance.
To Next Page
Loading...