Page 13 Operation Manual
3.0 CONTROLS
1102
Figure 3.0-1
Before operating the machine, take the time to familiarize
yourself with the operation and function of all the controls
(Figure 3.0-1).
A Press down and release, the f rst pedal from the left:
the column tilts backwards.
Press again: the column tilts forward.
B Press down and release the second pedal from the
left: the jaws of the turntable will retract. Do it again:
the jaws will expand. If you press the pedal prior to
the end of the stroke and release, the jaws may be
stopped in any position.
C Press down and hold, the second pedal from the right:
the turntable turns clockwise.
All the way down the turntable rotates at the maximum
speed (7 RPM).
Lift the pedal and the turntable turns counter-
clockwise (7 RPM).
D Open the bead breaker arm. Press down and hold the
f rst pedal from the right: by doing this you operate the
bead breaker blade and the arm will move towards
the machine. Release the pedal: the bead breaker
blade will retract.
442
441
WARNING!
ALWAYS KEEP ARMS AND LEGS AWAY FROM THE
BEAD BREAKER STROKE!!
E The push button on the handle releases and locks
the mount/demount tool in the correct position.
A
BC
D
E
EEWH311B Air-Electric Tire Changer
To Next Page
Loading...
