Page 25 Operation Manual
I. Check the automatic air lubricator oil level weekly. When
adding oil to the lubricator, disconnect the air supply f rst,
remove the f ll screw ‘A’, and add oil as needed. Make
sure seals are in place when replacing the cap.
553
Fig. 6.0-3
NOTICE!
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON-SUGGESTED
LUBRICANTS.
Suggested for the f lter/lubricator unit:
Snap-on Air Tool Oil IM1PT
J. Grease every 4 months the shaft that connects the
column to the cabinet. Add grease through the greasing
nipple. Fig. 6.0-4
7.1 INSTRUCTIONS FOR DISPOSAL
For waste electrical and electronic equipment
At the time of disposal, at the end of the lifetime of this
equipment, you must:
1. NOT dispose of the equipment as municipal waste and
separate collection is mandatory.
2. Ask the retailer about collection points authorized for regular
disposal.
3. Stick to the standards for correct waste management, to
prevent potential ef fects on the environment and human
health.
This symbol indicates that separate collection of waste electrical
and electronic equipment is mandatory for scrapping.
Fig. 6.0-4
EEWH311B Air-Electric Tire Changer
To Next Page
Loading...
