Snap-On EEWH311C - 3 Controls

EEWH311C
14
3.0 CONTROLS
Figure 3.0-1
Before operating the machine, take the time to familiarize
yourself with the operation and function of all the controls
(Figure 3.0-1).
A Press down and release, WITH LEFT FOOT, the ! rst
pedal from the left: the column tilts backwards.
Press again: the column tilts forward.
B
Press down and release, WITH LEFT FOOT, the
second pedal from the left: the jaws of the turntable
will retract. Do it again: the jaws will expand. If you
press the pedal prior to the end of the stroke and
release, the jaws may be stopped in any position.
C Press down and hold, WITH RIGHT FOOT, the
second pedal from the right:
the turntable turns clockwise.
All the way down the turntable rotates at the maximum
speed (7 RPM).
Lift the pedal and the turntable turns counter-
clockwise (7 RPM).
D Open the bead breaker arm. Press down and hold,
WITH LEFT
FOOT, the ! rst pedal from the right:
by doing this you operate the bead breaker blade and
the arm will move towards the machine. Release the
pedal: the bead breaker blade will retract.
WARNING!
ALWAYS KEEP ARMS AND LEGS AWAY FROM THE
BEAD BREAKER STROKE!!
E The push button on the handle releases and locks
the mount/demount tool in the correct position.
A
B C
D
E