EEWH311C
6
Tires and rims that are not the same diameter are mismatched.
• NEVER attempt to mount or in• ate any tire and rim that are mismatched.
• ALWAYS check to see that tire and rim diameters are the same.
A mismatched tire and rim could explode causing death or serious personal injury.
Over-pressurized tires can explode causing ! ying debris.
• Read and understand Operator’s Manual before operating.
• Keep bystanders away from work area.
• ALWAYS wear Safety Goggles.
• ALWAYS check to see that tire and rim diameters are the same.
• NEVER attempt to mount or in• ate any tire and rim with different diameters.
• Inspect tires. NEVER in• ate tires that are damaged, rotten or worn.
• NEVER in• ate ‘Split Rim Wheels’ on this tire changer or remove them and use only
an approved safety in• ation cage designed for this purpose.
• Lock turntable clamp on inside of rim before attempting to in• ate tire.
• Use approved tire bead lubricant before removing or installing tire on rim.
• ALWAYS position the optional “Safety Restraint Arm” over the wheel to hold it to
the turntable while in• ating if so equipped. (Optional Accessory)
• If a tire explodes on this tire changer, STOP using it until the “Safety Restraint
Arm” has been replaced, which must be done even if no damage is seen.
• NEVER place head or body over a tire during in• ation process.
• Use short bursts of air to seat tire beads. Check tire air pressure frequently.
NEVER exceed tire manufacturer’s pressure limits.
• NEVER attempt to bypass or alter the built-in air pressure limiter. Only in• ate tire
with air hose supplied with tire changer. NEVER use shop in• ation hose to in• ate
a tire.
• Tire Changer must be anchored to concrete • oor if equipped with a “Safety
Restraint Arm”.
Exploding tires can cause serious injury.
To Next Page
Loading...
