EEWH311C
5
Warning !
Warning !
Risk of crushing. Stand clear of bead breaker arm during operation.
• Read and understand the operation instructions before using this tire changer.
• Become familiar with all controls before proceeding with operation.
• Stand away from the bead breaker arm when in operation.
• Apply air to breaker in bursts if necessary to control arm depth.
• Keep all persons clear of tire changer.
Contact with moving parts could cause injury.
Risk of pinching or crushing hands and ! ngers when mounting and demounting.
• Read and understand the operation instructions before using this tire changer.
• Keep hands and " ngers clear of rim edge during demounting and
mounting process.
• Keep hands and " ngers clear of mount/demount head during operation.
• Keep hands and other body parts away from moving surfaces.
• Do not use tools other than those supplied with tire changer.
• Do not bypass any safety features.
• Use proper tire lubricant to prevent tire binding.
Contact with moving parts could cause injury.
Risk of eye injury. Flying debris, dirt, and " uids may be discharged during bead
seating and in" ation process.
• Remove any debris from tire tread and wheel surfaces.
• Remove excess tire lubricant or paste before in# ating.
• Wear approved safety glasses during mount and demount procedures.
Debris, dirt, and fl uids can cause serious eye injury.
Risk of injury. Tools may break or slip if improperly used or maintained.
• Read and understand the operation instructions before using this tire changer.
• Use only the mount/demount tire tool supplied with the tire changer.
• Frequently inspect, clean, and lubricate (if recommended) where
designated.
• Follow procedures when instructed in this manual.
Tools that break or slip can cause injury.
IMPORTANT !! SAVE THESE INSTRUCTIONS — DO NOT DISCARD !!
To Next Page
Loading...
