EasyManua.ls Logo

Snap-On EEWH312A - Safety Instructions and Warnings; Hazards and Precautions

Snap-On EEWH312A
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EEWH326A Tire Changer Operation Manual
- Page 6 -
Overin ated tires or tires mounted on the wrong sized rims can explode produc-
ing hazardous ying debris.
 Read Operators Manual before using this Tire Changer.
 Never mount tire on rim with different sized diameter.
 Never exceed maximum in ation pressure listed on tire sidewall.
 Always use safety restraint arm to hold wheel in place while
in ating.
 Always use attached air hose to in ate tires.
Exploding tires can cause death or serious injury.
Risk of electrical shock.
 Do not operate equipment with a damaged power cord or if the
equipment has been dropped or damaged, until it has been
examined by a quali ed service person.
 If an extension cord is necessary, a cord with a current rating equal
to or greater than that of the equipment should be used. Cords
rated for less current than the equipment can overheat.
 Unplug equipment from electrical outlet when not in use. Never
use the cord to pull the plug from the outlet. Grasp plug and pull to
disconnect.
 Do not expose the equipment to rain. Do not use on wet surfaces.
 Plug unit into correct power supply.
 Do not remove or bypass grounding pin.
Contact with high voltages can cause death or serious injury.
Risk of electrical shock. High voltages are present within the base unit.
 There are no user serviceable items within the unit.
 Service on the unit must be performed by quali ed personnel.
 Do not open any part of the base cabinet.
 Unplug the unit before servicing.
Contact with high voltages can cause death or serious injury.
SAFETY INSTRUCTIONS
IMPORTANT!! SAVE THESE INSTRUCTIONS

Related product manuals