Snap-On EEWH312A - Operational Warnings and Risks; Mechanical and Crushing Hazards; Eye Injury and Tool Use Risks

EEWH312A Tire Changer Operation Manual
- Page 7 -
Risk of crushing. Stand clear of bead breaker arm during operation.
 Read and understand the operation instructions before using this
tire changer.
 Become familiar with all controls before proceeding with operation.
 Stand away from the bead breaker arm when in operation.
 Apply air to breaker in bursts if necessary to control arm depth.
 Keep all persons clear of tire changer.
Contact with moving parts could cause injury.
Risk of pinching or crushing hands and fi ngers when mounting and demounting.
 Read and understand the operation instructions before using this
tire changer.
 Keep hands and fi ngers clear of rim edge during demounting and
mounting process.
 Keep hands and fi ngers clear of mount/demount head during opera-
tion.
 Keep hands and other body parts away from moving surfaces.
 Do not use tools other than those supplied with tire changer.
 Do not bypass any safety features.
 Use proper tire lubricate to prevent tire binding.
Contact with moving parts could cause injury.
Risk of eye injury.
Flying debris, dirt, and fl uids may be discharged during bead
seating and infl ation process.
 Remove any debris from tire tread, wheel surfaces.
 Remove excess tire lubricant before infl ating.
 Wear approved safety glasses during mount and demount
procedures.
Debris, dirt, and fl uids can cause serious eye injury.
Risk of injury. Tools may break or slip if improperly used or maintained.
 Read and understand the operation instructions before using this
tire changer.
 Use only the mount-demount tire tool supplied with the tire changer.
 Frequently inspect, clean, and lubricate (if recommended) where
designated.
 Follow procedures when instructed in this manual.
Tools that break or slip can cause injury.
IMPORTANT !! SAVE THESE INSTRUCTIONS -- DO NOT DISCARD !!
Warning !
Warning !