Need help?Do you have a question about the Snap-On MIG125 and is the answer not in the manual?
General| Input Voltage | 120V |
|---|---|
| Output Current Range | 30-125 A |
| Welding Process | MIG (GMAW) |
| Input Current | 20A |
| Duty Cycle | 20% @ 90A |
| Wire Size Range | 0.023 - 0.035 in |
Instructions for welding mild steel using shielding gas or without.
Preventing fires caused by welding sparks, slag, and hot metal.
Protecting against burns from heat and ultraviolet radiation.
Managing health risks associated with welding fumes and metal dust.
Safety measures for handling gas cylinders and preventing explosions.
Measures to prevent and respond to electric shock incidents.
To Next Page
