Snap-On MIG200i User Manual

200 AMP PULSE MIG WELDER
MIG200i
The MIG200i Pulse is a 230VAC single-phase synergic inverter power source for MIG welding. This
versatile power source is suitable for various applications from general repairs to speci c material
types used in the body shop industry. Welds a variety of material types and thicknesses such as
steel, stainless-steel, aluminum, high strength and boron steels. Preset synergic curves automati-
cally provide proper settings for individual situations and reduce set up times.
INTRODUCTION
3301025

Snap-On MIG200i Specifications

General

Brand	Snap-On
Model	MIG200i
Category	Welding System
Language	English

Summary

SAFETY INFORMATION

MUST READ INSTRUCTIONS BEFORE USE

Explains the importance of following all safety messages and instructions in the manual.

Arc Welding

Provides specific safety warnings and precautions related to arc welding hazards.

Risk of Electrical Shock

Details hazards and safety measures concerning electrical shock risks during operation.

Risk of Explosion

Warns about explosion risks due to welding sparks and the presence of flammable vapors.

Electrical and Magnetic Fields

Addresses potential hazards from electrical and magnetic fields generated by the welder.

SPECIFICATIONS

EXPLANATION OF TECHNICAL SPECIFICATIONS LISTED ON THE MACHINE PLATE

Details the meaning of various technical specifications found on the machine's data plate.

PROTECTION DEVICES

Describes built-in protection mechanisms like block protection and thermal cutout.

ASSEMBLING THE UNIT

REEL FITTING SEQUENCE

Step-by-step instructions for correctly fitting the wire reel into the welding machine.

SET-UP FOR STEEL WELDING

Guides the user through the specific setup procedures for welding steel.

MIG WELDING WITHOUT GAS

QUICK START GUIDE

SET THE WIRE SIZE AND WELDING GAS

SET THE THICKNESS OF THE METAL BY TURNING KNOB B

ADJUSTING THE WELDING VOLTAGE (ARC LENGTH)

ADVANCED SETTING

MAINTENANCE

HOW TO PROCEED AFTER MAKING REPAIRS

WIRING DIAGRAM

WARRANTY/SERVICE AND REPAIR