23
x Battery Replacement
Replace with three "AA" cells only.
R Do not attempt to recharge alkaline cells.
R Do not mix different battery types.
R Replace all batteries at same time.
R Store wrench in dry place.
R Remove batteries when storing wrench unused longer than 3 months.
Note: When replacing batteries, real-time-clock will maintain date and time for 20 minutes.
Note: Turn End Cap counter-clockwise to unscrew.
Note: When Replace Battery screen is displayed wrench will no longer operate until batteries are
replaced. Only POWER button functions which immediately turns off wrench.
x Memory Indicators
INSERT NEW CELLS
POSITIVE (+) END
INTO HANDLE FIRST
REPLACE BATTERY
MEMORY
FULL
ERROR
Less than 50 torque and angle records
stored in memory.
50 torque or angle records stored in memory. Oldest record will
be replaced by next record.
Memory read or write error. Return to Snap-on Repair Center if
persists after clearing memory.
LOW BATTERY
To Next Page
Loading...
Need help?
General
