50
SOS Features
SOS Help
Within the SOS application, the SOS Help feature allows you to push through
an SMS help text to all of your preprogrammed SOS contacts or to Send
SMS to Contact 1 of your preprogrammed contacts without activating SOS
sequence.
SOS Enabled or SOS Disabled
Choose to Enable or Disable the SOS application. When enabled the SOS
application is ready for use and all preprogrammed setting will function.
When disabled pressing the SOS button will not initiate SOS sequence and
no SOS features will function. To disable use Pin Code: 1324
Fall Detection
Fall detection works by activating the SOS button when the device falls from
an approximate minimum of 4 in. A verbal warning will alert, "Fall detected�
Press SOS firmly for 3 seconds to stop SOS sequence� SOS sequence will
begin momentarily�" This alert will sound three times before activating SOS
sequence. Disable SOS sequence by holding the SOS button firmly until stop.
You can enable or disable Fall detection by switching between Fall Detection
Off or Fall Detection On.
Note: When using fall detection we recommend wearing your ez4G on a
Snapfōn® Lanyard or a Snapfōn® Belt Holster.
To Next Page
Loading...
